Air Suspension

Nylon Flexible DOT Air Line 1/4" 60ft Roll Flexible nylon air line DOT approved is roughly 18M. This is the standard size roll you get in a full management pack.     

Nylon Flexible DOT Air Line 3/8" 60ft Roll Flexible nylon air line DOT approved is roughly 18M. This is the standard size roll you get in a full management pack. 

4 AWG Power Kit 4 gauge wiring and power kit, ideal for when installing an Air Zenith OB2 compressor that requires high current supply or a dual Viair setup Includes -(20ft) Red 4 Gauge Power Wire(4ft) Black 4 Gauge Power WireWire Distribution Block...

8 AWG Power Kit 8 gauge wiring and power kit, ideal for when installing a single Viair compressor set up Includes -(20ft) Red 8 Gauge Power Wire(4ft) Black 8 Gauge Power WireMini ANL Fuse holder40A Mini ANL Fuse(2) Red Ring terminals(2) Black Ring...

AccuAir's power supply features a 25ft, 6 gauge wire with a pre-installed in-line fuse holder for easy installation. Includes: 25ft of red 6 gauge power wire 1 sealed maxi-fuse holder with 70A maxi-fuse 1 extra 70A maxi-fuse 2 copper lug...

AccuAir's ENDO compressor mounting bracket attaches your air compressor onto the AccuAir ENDO tank, for an easy mount solution. This modular design allows the tank and compressor to be mounted together to simplify installation in the trunk of a car,...

AccuAir's ENDO compressor mounting bracket attaches your air compressor onto the AccuAir ENDO tank, for an easy mount solution. This modular design allows the tank and compressor to be mounted together to simplify installation in the trunk of a car,...

Replacement Pillow Ball Support Collar. Use for assembly involving Camber Top Mounts on BAGS Suspension or Air Lift Struts.  Available sizes: M10 M12 M14 Not sure what size you need? Get in touch with our sales team and they will get this...

This is a replacement BC Racing Top Mount Stud and Nut which is used to secure the top mount to the top strut chassis turret of the vehicle.  This will fit most Air Lift Performance Front Struts - get in touch to confirm if you're unsure...

This is a replacement BC Racing Pillowball Mount Nut which is used to secure the top mount to the performance strut damper.  This will fit most Air Lift Performance Front Struts. Get in touch to confirm, if you're unsure!    NB. We...

Air Lift's 3H sensor harness is split up into four sections. Be sure to choose the correct location of the harness you are replacing since the front harnesses are longer than the rear harnesses. NB. We cannot ensure all replacement parts will be in...

Air Lift's 3H sensors utilise a replaceable plastic sensor arm that will snap under excessive load, preventing the sensor itself from being damaged. This plastic sensor arm is a replacement for the standard arm that comes pre-installed on Air Lift's 3H...

This is the standard wiring harness that comes with all Air Lift 3H and 3P management systems. This harness is only capable of providing power to a single compressor. If you are planning on running dual compressors you will need the Air Lift 3H / 3P...

The standard wiring harness that comes with Air Lift’s 3P and 3H systems is only capable of providing power to a single compressor. This Air Lift 3H / 3P Second Compressor Harness allows you to add a second compressor to your system. Wiring is a...

Water traps are used to help prevent condensation from building up in your valves or manifold. Water traps are a must for those that daily drive in below freezing temperatures. The Air Lift Auto Drain Water Trap will automatically purge when the...

Air Lift Chapman Universal Struts Can't find a bolt on air strut application for your car? Make your own with Air Lift's universal strut packages! These universal struts come with the materials to make your own top and bottom strut mounts to fit your...

Replacement Spherical Bearing compatible with BC Racing or Air Lift Performance Camber Top Mounts.  Product will come with a step-by-step instruction manual on how to replace these yourself!  Bearings are sold individually as pictured...

Lost/Stolen or damaged your 3H or 3P controller? Grab a fresh replacement! Notes This is a replacement controller Unit will only work with the 3P or 3H ECU / Manifold AirLift Part #27051 NB. We cannot ensure all replacement parts will be in...